前トルクフランジなし継手

Name: 前トルクフランジなし継手
Brand: Nanjing Runze Fluid Control Equipment Co., LTD.

プレトルクフランジレス継手は、キャップの抵抗が正しいトルクに達するまで増加すると、クリックすることで手に密着した継手に独自の接続を提供します。それはPPまたはPTFE材料でできており、ガスまたは液体の移動のためのプレトルクナットとフェルールが付属しています。これらのねじ継手1.6/2.0/2.5/3.0/3.2mmの管の外径のために利用できます。

メールを送信

Video of Pre-torque Flangeless Fittings

预紧力详情1.jpg

Specification of Pre-torque Flangeless Fittings

Nut Specification

Ferrule Specification

Torque Range & Colors of Pre-torque Flangeless Fittings

Color	Blue	Yellow	Red
Nut
Torque Range	0.11-0.15N/m	0.15-0.20N/m	0.20-0.25N/m
Operating Environment	Room Temperature and Pressure Tube wall thickness≤0.5mm	Room Temperature and Pressure Tube wall thickness＞0.5mm	Temperature＜100℃ Pressure＞0.8Mpa Tube WT＞0.5mm

预紧力详情2.jpg

Dimension (unit: mm)

预紧力尺寸英文.jpg

Application Note of Pre-torque Flangeless Fittings

1. Choose 1/4-28 nut when receiving port is 1/4-28; Choose M6 nut when receiving port is M6.

2. Before connecting fittings, ensure the end of the tubing has a clean, square, burr-free cut. This is very important, as the square cut helps the tubing make full contact with the bottom of the mating port. Neglecting to properly cut the tubing could lead to dead volume, resulting in peak distortion such as fronting, tailing or broadening.

3. Two-Piece Fittings Installation Steps:

a. Slide the nut, followed by the ferrule, at least 3/16” (4.7625mm) from the end of the clean cut tubing

b. Insert the assembly into the receiving port, pushing the tubing into the port until it bottoms out.

c. Finger or wrench tighten the fittings until the cap comes out "click" which means properly tightened

d. After several uses (especially at high pressure) the ferrule should be replaced.

预紧力详情3.jpg

前トルクフランジなし継手

Video of Pre-torque Flangeless Fittings

Specification of Pre-torque Flangeless Fittings

Torque Range & Colors of Pre-torque Flangeless Fittings

Application Note of Pre-torque Flangeless Fittings

関連するプレトルクフランジレス継手PDF